|
|
|
|
The T1 contains:
- 1 pair T1-Sunray:
Sunray with "cost-no-object" pure silver cross-over
- 1 pair T1-Subtower:
bass extender with unique DBCD-technology (DUAL BASS COMPRESSION DESIGN)
with 3 times adjustable VarioGain and Aerotune-System
- 1 x T1-LPX: active
crossover for driving the T1-Subtowers and / or the bass modules active
passive mode:
The T1 is a perfetly balanced passive speaker. With its VarioGain
and Aerotune, for both Subtowers and Sunray, it can be adjusted easily
to the most rooms. A simple and perfect solution in our opinion. If
the room or the personal taste requires even more flexibility, then
one can use the LPX.
active mode:
This mode we do recommend for critical rooms, and for the best results.
One can adjust the Subtowers and bass modules of the Sunray in a way
higher range, in level and frequency. One needs 2 or 4 channels more
for that. For detailed explanations we will be answer all your questions.
Feeel free to download the schematics here as PDF:
T1 with three
stereo-amps.PDF
T1 with six mono-amps.PDF
T1-Sunray
- 3 seperated
self-adjusting modules for high-midrange and bass: 2 x TIDAL-NV-bass
modules, 1 x TIDAL-ND-RMD high-midrange modules, cabinet-walls up
to 5" thick, optimized internal aerodynamic conditions
- step response
controlled point-source-centred bass reproduction, the bass is beeing
reproduced around the high-midrange source. Harmonic excitation of
room-modes for a very even and symetrical first reflexion in the room
- therefore very uncrtitical to place even in smaller rooms, quasi-infinate
front-baffle via a "pneumatic-airwall" by phaseshift-controlled
submodules
- 4 x 220 mm (9")
Thiel & Partner (Accuton) woofer with black ceramic-diaphragm,
exclusive made for TIDAL
- 2 x 173 mm (7")
Thiel & Partner (Accuton) woofer with black ceramic-diaphragm,
exclusive made for TIDAL
- 1 x 30 mm (1,2")
Thiel & Partner (Accuton) tweeter with black diamond-diaphragm,
exclusive made for TIDAL
- AEROTUNE-System:
2-times adjustable, for flexible and uncritical in-room placement
and bass quality
- VarioGain: 3-times
adjustable level and cut off frequency
- adjustable diamond-tweeter
curve (hard room-refections / soft room-reflections)
- mechanical and
pressure isolated passive crossover network laid out with ultra low
tolerance components
- exclusive use
of unique pure silverfoil-capacitors in PIOCAST-technology, silver-carbon-resistances
and PIOCAST-aircore-inductors.

- extremly linear
frequency response, excellent step response, optimised phase and group
delay
- massive silver/goldplated
soft-copper 100-ampere binding posts with removeable heads for fullsize-eylets,
spades and banana's, wired internally with finest coaxial and silvercable
- single-wiring
/ passive bi-amping / active bi-amping possible
T1-Subtower
- 2 seperated bass
modules in RMD-technology
- 2 x 270 mm woofer
with black aluminum diaphragm (special made for TIDAL with long excurtion
and a very impulse response, exclusively from SEAS Excel)
- DBCD (DUAL BASS
COMPRESSION DESIGN) technology: face-to-face mounted woofers with
a defined distance to each other and an internal phase correction
do compress the air directly between the diaphragmes and accelerate
the impulse response in combination with a very deep F3
- very even room
mode excitement, therefore uncritical in-room placement
- AEROTUNE-System:
3-times adjustable F3-curve
- VarioGain: 3-times
adjustable level and cut off frequency
- plug & play
mechanism with internal connection of the two drivers without seeing
any cable
T1-LPX
- active Stereo-cross
over
- frequency and
level adjustable for the Subtowers
- frequency and
level adjustable for the Sunray bass modules
- pure discrete
designed dual mono topology
- 2 x dual mono
powersupply with toroid transformer
- 1 x separate
toroid transformer powersupply for the control unit
- 80
000µF stabilisation capacity, ultra fast response with high-grade-long-life-capacitors
- filtering and
regulation system
- two-stage EMC-filter
- 1 Stereo-input
RCA & true XLR
- 1 Stereo-output
RCA & true XLR: Lowpassfilter T1-Subtower
- 1 Stereo-output
RCA & true XLR: Lowpassfilter Sunray bass-module
|
Including:
- 4
professional ATA-flightcases on wheels
- exclusive
stainless steel isolators, stand-bars made from polished aluminum,
microfibre-cleaning cloth, 4 complete sets Sunray-Isolator feet and
all accessory parts for assembling it
- owners
manual book with its personal measurement protocols
- serial
cabinet finish, high gloss polished piano lacquer: midnight black
- optional
veneer-group 1, high gloss polished woods in piano lacquer: tiger-eucalyptus,
curled-bubinga, rose-bubinga
- optional
veneer-group 2, high gloss polished woods in piano lacquer: african
pyramided mahogany, ebony-macassar
- cabinets
can be mixed in black piano finish and veneers
- other
wishes or veneers: on request
|
T1-Sunray
- drivers, each
speaker : 4 x 222 mm woofers, 2 x 173 mm midrange-woofers, 1
x 30 mm tweeter
- dimensions:
199 cm x 33 cm x 60 cm
- weight: 1.150
lbs. / 520 Kg (with packing)
T1-Subtower
- drivers, each
speaker : 2 x 260 mm woofers
- dimensions:
199 cm x 39 cm x 39 cm
- weight: 980
lbs. / 445 Kg
(with packing)
T1-LPX
- dimensions:
44 cm x 13 cm x 39 cm
- weight: 71lbs.
/ 32 Kg (with packing)
Drivers:
4 x 11", 8 x 9" woofers, 4 x 7" midrange-woofers, 2 x 1,2"
tweeters
- nominal power
input: 200 / 400 VA
- nominal impedance:
4-5 Ohm
- frequency
response: very linear, F3 = 18 Hz
- recommended
amp input: We recommend quality instead quantity. Real 30 Watt
at 8 Ohm are ok for normal listening levels (in rooms up to 40-60m²).
It is most easy to drive and plays even at lowest levels "full
and rich".
To use the whole dynamic range of it and listening complex music also
from time to time very loud we recommend 250 watts at 8 ohm.
- efficiency:
since several unrealistic numbers of competitors we don't want
to confuse clients by comparing non-saying numbers on paper. Therefore
it is: "Good efficiency, very easy to drive also with tube amps
/ SET'S".
- weight: 2.130
lbs. / 965 Kg (the whole system)

|